Inverse modeling and uncertainty analysis of potential groundwater recharge to the confined semi-fossil Ohangwena II Aquifer,Namibia     

Markus Wallner  Georg Houben  Christoph Lohe  Martin Quinger  Thomas Himmelsbach 《Hydrogeology Journal》2017,25(8):2303-2321

The identification of potential recharge areas and estimation of recharge rates to the confined semi-fossil Ohangwena II Aquifer (KOH-2) is crucial for its future sustainable use. The KOH-2 is located within the endorheic transboundary Cuvelai-Etosha-Basin (CEB), shared by Angola and Namibia. The main objective was the development of a strategy to tackle the problem of data scarcity, which is a well-known problem in semi-arid regions. In a first step, conceptual geological cross sections were created to illustrate the possible geological setting of the system. Furthermore, groundwater travel times were estimated by simple hydraulic calculations. A two-dimensional numerical groundwater model was set up to analyze flow patterns and potential recharge zones. The model was optimized against local observations of hydraulic heads and groundwater age. The sensitivity of the model against different boundary conditions and internal structures was tested. Parameter uncertainty and recharge rates were estimated. Results indicate that groundwater recharge to the KOH-2 mainly occurs from the Angolan Highlands in the northeastern part of the CEB. The sensitivity of the groundwater model to different internal structures is relatively small in comparison to changing boundary conditions in the form of influent or effluent streams. Uncertainty analysis underlined previous results, indicating groundwater recharge originating from the Angolan Highlands. The estimated recharge rates are less than 1% of mean yearly precipitation, which are reasonable for semi-arid regions.  相似文献   

Impact angle influence in high velocity dust collisions during planetesimal formation     

Jens Teiser  Markus Küpper 《Icarus》2011,215(2):596-598

We have examined the influence of impact angle in collisions between small dust aggregates and larger dust targets through laboratory experiments. Targets consisted of μm-sized quartz dust and had a porosity of about 67%; the projectiles, between 1 and 5 mm in diameter, were slightly more compact (64% porosity). The collision velocity was centered at 20 m/s and impact angles range from 0° to 45°. At a given impact angle, the target gained mass for projectiles smaller than a threshold size, which decreases with increasing angle from about 3 mm to 1 mm. The fact that growth is possible up to the largest angles studied supports the idea of planetesimal formation by sweep-up of small dust aggregates.  相似文献   

Climate Change Impacts on Flow,Sediment and Nutrient Export in a Great Lakes Watershed Using SWAT          下载免费PDF全文

Siddhartha Verma  Rabin Bhattarai  Nathan S. Bosch  Richard C. Cooke  Prasanta K. Kalita  Momcilo Markus 《洁净——土壤、空气、水》2015,43(11):1464-1474

  相似文献   

Editorial     

William Lotko  Markus Rapp  Bethan Keall 《Journal of Atmospheric and Solar》2010,72(5-6):375

  相似文献   

Exploring large wood retention and deposition in contrasting river morphologies linking numerical modelling and field observations          下载免费PDF全文

Virginia Ruiz‐Villanueva  Bartłomiej Wyżga  Hanna Hajdukiewicz  Markus Stoffel 《地球表面变化过程与地形》2016,41(4):446-459

Large wood tends to be deposited in specific geomorphic units within rivers. Nevertheless, predicting the spatial distribution of wood deposits once wood enters a river is still difficult because of the inherent complexity of its dynamics. In addition, the lack of long‐term observations or monitored sites has usually resulted in a rather incomplete understanding of the main factors controlling wood deposition under natural conditions. In this study, the deposition of large wood was investigated in the Czarny Dunajec River, Polish Carpathians, by linking numerical modelling and field observations so as to identify the main factors influencing wood retention in rivers. Results show that wood retention capacity is higher in unmanaged multi‐thread channels than in channelized, single‐thread reaches. We also identify preferential sites for wood deposition based on the probability of deposition under different flood scenarios, and observe different deposition patterns depending on the geomorphic configuration of the study reach. In addition, results indicate that wood is not always deposited in the geomorphic units with the highest roughness, except for low‐magnitude floods. We conclude that wood deposition is controlled by flood magnitude and the elevation of flooded surfaces in relation to the low‐flow water surface. In that sense, the elevation at which wood is deposited in rivers will differ between floods of different magnitude. Therefore, together with the morphology, flood magnitude represents the most significant control on wood deposition in mountain rivers wider than the height of riparian trees. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

An alternative approach to transverse and profile terrain curvature     

Patrik Krebs  Markus Stocker  Gianni Boris Pezzatti  Marco Conedera 《International journal of geographical information science》2013,27(4):643-666

Terrain curvature is one of the most important parameters of land surface topography. Well-established methods used in its measurement compute an index of plan or profile curvature for every single cell of a digital elevation model (DEM). The interpretation of these outputs may be delicate, especially when selected locations have to be analyzed. Furthermore, they involve a high level of simplification, contrasting with the complex and multiscalar nature of the surface curvature itself. In this paper, we present a new method to assess vertical transverse and profile curvature combining real-scale visualization and the possibility to measure these two terrain derivatives over a large range of scales. To this purpose, we implemented a GIS tool that extracts longitudinal and transverse elevation profiles from a high-resolution DEM. The performance of our approach was compared with some of the most commonly used methods (ArcMap, Redlands, CA, USA; ArcSIE, Landserf) by analyzing the terrain curvature around charcoal production sites in southern Switzerland. The different methods produced comparable results. While conventional methods quickly summarize terrain curvature in the form of a matrix of values, they involve a loss of information. The advantage of the new method lies in the possibility to measure and visualize the shape and size of the curvature, and to obtain a realistic representation of the average curvature for different subsets of spatial points. Moreover, the new method makes it possible to control the conditions in which the index of curvature is calculated.  相似文献   

Fusion of multi‐resolution surface (terrestrial laser scanning) and subsurface geodata (ERT,SRT) for karst landform investigation and geomorphometric quantification     

Christoph Siart  Markus Forbriger  Erich Nowaczinski  Stefan Hecht  Bernhard Höfle 《地球表面变化过程与地形》2013,38(10):1135-1147

A multi‐method research design based on terrestrial laser scanning, GIS, geophysical prospecting (electrical resistivity tomography, refraction seismics) and sedimentology is applied for the first time to investigate enclosed karst depressions in an integrated way. Fusing multi‐resolution surface and subsurface geodata provides profound insights into the formation, geometry and geomorphologic processes of dolines. The studied landforms, which are located in the Dikti Mountains of East Crete, are shown to be filled by loose sediments of thicknesses of up to 30 m that mainly consist of fine‐grained material overlying solid bedrock at depths below 35 to 45 m. By combining subsurface observations with geomorphometric calculations, local doline genesis can be traced back to initial collapse of fractured bedrock followed by subsequent infilling with colluvials. In order to define crucial methodological requirements and guidelines for data fusion, both the impact of different elevation models and the influence of data resolution are assessed. Surface volumes of depressions derived by the digital surface model are 7–21% higher than the results obtained from the terrain model due to vegetation. Similarly, estimates of infill volume calculated on the basis of geophysical outcomes and elevation data differ by up to 13%. Calculations of the landforms' current volumes (i.e. total surface and subsurface volume), however, are fairly insensitive to raster resolution. Hence, the distinct geomorphologic properties of landforms (e.g. shape, terrain roughness, slope inclination) substantially determine the geomorphometric analysis of both surface and subsurface data. As shown by the findings, data fusion to integrate digital terrain, geophysical and sedimentological datasets of varied resolutions benefits geomorphologic studies and helps provide a comprehensive image of landforms. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

Variations in fluid chemistry and membrane phospholipid fatty acid composition of the bacterial community in a cold storage groundwater system during clogging events     

Alexandra Vetter  Kai Mangelsdorf  Markus Wolfgramm  Kerstin Rauppach  Georg Schettler  Andrea Vieth-Hillebrand 《Applied Geochemistry》2012

  相似文献   

Uncertainties of geochemical modeling during CO<Subscript>2</Subscript> sequestration applying batch equilibrium calculations     

Frank?DethlefsenEmail author  Christoph?Haase  Markus?Ebert  Andreas?Dahmke 《Environmental Earth Sciences》2012,65(4):1105-1117

One of the uncertainties in the field of carbon dioxide capture and storage (CCS) is caused by the parameterization of geochemical models. The application of geochemical models contributes significantly to calculate the fate of the CO₂ after its injection. The choice of the thermodynamic database used, the selection of the secondary mineral assemblage as well as the option to calculate pressure dependent equilibrium constants influence the CO₂ trapping potential and trapping mechanism. Scenario analyses were conducted applying a geochemical batch equilibrium model for a virtual CO₂ injection into a saline Keuper aquifer. The amount of CO₂ which could be trapped in the formation water and in the form of carbonates was calculated using the model code PHREEQC. Thereby, four thermodynamic datasets were used to calculate the thermodynamic equilibria. Furthermore, the equilibrium constants were re-calculated with the code SUPCRT92, which also applied a pressure correction to the equilibrium constants. Varying the thermodynamic database caused a range of 61% in the amount of trapped CO₂ calculated. Simultaneously, the assemblage of secondary minerals was varied, and the potential secondary minerals dawsonite and K-mica were included in several scenarios. The selection of the secondary mineral assemblage caused a range of 74% in the calculated amount of trapped CO₂. Correcting the equilibrium constants with respect to a pressure of 125 bars had an influence of 11% on the amount of trapped CO₂. This illustrates the need for incorporating sensitivity analyses into reaction pathway modeling.  相似文献   

Using horizontal and vertical building structure to constrain indirect sensor orientation     

Markus Gerke   《ISPRS Journal of Photogrammetry and Remote Sensing》2011,66(3):307-316

This paper presents a method to integrate linear horizontal, vertical and right-angled scene structures into the bundle adjustment of image sequences. An increasing number of airborne image acquisition systems is available and equipped with non-metric small- or medium-frame cameras and no or insufficiently accurate INS devices. In cases where the data is to be used for the production of geo-spatial data, where a certain accuracy and precision is required, an indirect sensor orientation, possibly including self-calibration, needs to be performed. The idea which led to the presented approach is to reduce the number of GCPs necessary for this task by applying the mentioned scene structures. The method directly uses the linear structures, visible at man-made objects as fictive observations within the adjustment, while self-calibration of intrinsic camera parameters and lens distortion is included as well.Experiments with two datasets demonstrate that, through this method, only limited GCP information is required to obtain satisfactory results. In fact, in one experiment using oblique images, several scene constraints were provided and only the datum was defined by ground control. The residuals at check points from this setup were similar to the traditional case where several well-distributed GCPs were available in the scene. In the second experiment the ability of this approach to support the bundle adjustment was shown for a UAV dataset. Although no GCP and camera calibration information was available, the visual inspection of adjusted object points and the residuals at horizontal structures confirmed the ability of the method to align an image block with the structure, as embodied in the defined scene constraints. Despite the convincing outcome of the experiments, it needs to be mentioned that some manual work is still involved in defining the constraints. In future work the issue of automation will be addressed.  相似文献